Description
The AFTCO Goldfinger Downrigger Release Clip is precision-built to handle release applications on downriggers. The Goldfinger clip uses an extremely reliable numbered and graduated adjustment slider which allows for a precise setting of release-tension every time. Engineered not to foul or tangle, it features a large diameter stainless wire bail for less line wear and smoother releases. Use it with lighter live baits like Ballyhoo or Pilchard.
Simply attach the AFTCO Goldfinger Downrigger Release Clip directly to the cable above the downrigger ball. This is best accomplished by threading one side of the clip onto the cable, then placing a crimp on the cable before passing it through the remaining half of the clip.
Once the cable has been terminated with the cannonball’s snap, the clip can be positioned approximately one foot above the ball. The crimp should then be “swaged” into place. Note that the clip must be positioned with the adjustment-slider “down” or towards the bail. The fishing line should be twisted 5 to 10 times before placing it over the release bail. Easy!
AFTCO Goldfinger Downrigger Release Clip Features:
- Composite and stainless construction
- Corrosion resistant
- Precision tension-adjustment slider
- Lightweight design
- Engineered not to foul or tangle
- Large diameter stainless steel wire bail
- Less line wear and smoother releases
