Description
Rotating discharge body for easy installation. Valves designed to prevent backflow.
Features: Manual
- The Rule LP900D Bilge Pump is a low profile pump with 900 gallons per hour capacity
- Designed for tight spaces, the height of the pump is only 2-1/4″
- It features a threaded discharge nozzle to which you can attach either the included straight or 90° fitting
- Multiple ports are available for this pump
- All ports are included
- 3/4″ Straight
- 3/4″ Right angle
- 1″ and 1-1/8″
- It also includes a tricuspid check valve for the straight fitting which can be used to minimize the back flow of water
- The entire discharge body swivels up to 180° for ease of installation
- The hose can also swivel 360° for better routing
- The 900D model requires a float and/or panel switch (Sold Separately)
Features: Automatic
- The Rule LP900S Automatic Bilge Pump is a low profile pump with 900 gallons per hour capacity
- Designed for tight spaces, the height of the pump is only 2-1/4″
- It features a threaded discharge nozzle to which you can attach either the included straight or 90° fitting
- Multiple ports are available for this pump
- All ports are included
- 3/4″ Straight
- 3/4″ Right angle
- 1″ and 1-1/8″
- It also includes a tricuspid check valve for the straight fitting which can be used to minimize the back flow of water
- The entire discharge body swivels up to 180° for ease of installation
- The hose can also swivel 360° for better routing
- The LoPro LP900S has (2) Automated settings, enabling the pump to turn on when the water reaches either 2″ or 1.3″
- High or Low Water Sensing Mode:
- The pump starts when water reaches a 2″ level
- By turning the motor cartridge upside down, the sensor is set at 1.3″
- Electronic Automatic Mode:
- The pump automatically turns on every 2.5 minutes to check for water, and if it’s detected the pump stays on until the water is gone
- High or Low Water Sensing Mode:
